Regulators developed by RIGAS improve analysis accuracy with an exclusive regulator optimized for gas analysis to ensure efficiency.
For regulators suitable for components and concentration levels, refer to the company’s website
Technical Data> Regulator Selection Guide.
Product 01
| Model | STAGE | GAUGE | INLET CONNECTIONS |
OUTLET CONNECTIONS |
||
|---|---|---|---|---|---|---|
| GB1-2506 | 1 Stage | 25 * 0.6 MPa |
R : 22mm-RH L : 22mm-LH |
1/4 Inch NPT | ||
| GB2-2506 | 2 Stage | 25 * 0.6 MPa | ||||
| GS1-2506 | 1 Stage | 25 * 0.6 MPa | ||||
| GS2-2506 | 2 Stage | 25 * 0.6 MPa |
| Model | STAGE | GAUGE | INLET CONNECTIONS |
OUTLET CONNECTIONS |
||
|---|---|---|---|---|---|---|
| SS1-2506 | 1 Stage | 2.5 * 0.6 MPa | 1/4 Inch NPT | 1/4 Inch NPT |
Product 02
Pre Analysis System (PAS) removes the effects of corrosive and adsorbent materials inside and outside the sample introduction section before and after analysis and is used by connection to a gas regulator.
PAS (Pre Analysis System) is developed to easily remove contaminants (moisture, oxygen, and previous analytical components) inside the sample introduction unit and equipment that can occur when samples are introduced to the equipment. The use of PAS improves adsorption and desorption that may occur when analytes react with contaminants and increases analysis accuracy as the analytes do not react.
